Ultraformer III (Ultraformer Three)

Ultraformer III (Ultraformer Three) Program for skin tightening, wrinkle reduction, and fat dissolution under the skin.

It utilizes High Intensity Focused Ultrasound technology, or HIFU, which is widely known. By using MMFU (Micro & Macro Focused Ultrasound) energy waves, this technology is used for tightening the skin on the face or other areas that have become loose or sagging due to skin structure degradation and collagen reduction. It is recognized by food and drug administrations in various countries such as Thailand, South Korea, the United States, Australia, and European countries. The MMFU technology has met the standards in over 50 countries worldwide.

By using MMFU technology in the Ultraformer III program, it is divided into 2 types of energy:

Micro Focused Ultrasound

icro Focused Ultrasound is an ultrasound wave energy that helps tighten the deep layers of the skin, such as the Superficial Musculo Aponeurotic System (SMAS) layer. This layer is significant for facial muscles and is the layer used by plastic surgeons for facelifts. The thermal energy from Micro Focused Ultrasound causes the SMAS layer to contract with a temperature of 65-75°C and a wave diameter of 0.5-1 mm.

Results of Micro Focused Ultrasound: It effectively contracts and tightens the skin.

Macro Focused Ultrasound

Macro Focused Ultrasound is an ultrasound wave energy that helps dissolve facial fat and stimulates collagen production under the skin. By using thermal energy with a temperature of 65-75°C, the fat under the skin is broken down and dissolved. Additionally, it promotes the creation of new collagen under the skin, making the skin tight and smooth.

Results of Macro Focused Ultrasound: It reduces fat and generates collagen under the skin.

The Ultraformer III program for skin tightening, wrinkle reduction, and fat dissolution under the skin offers various applicator heads to choose from, based on the client’s specific concerns. This ensures the best and most appropriate results. The options are as follows:

1.5-2.0 mm Depth Head: Suitable for addressing superficial skin issues. This head is used for shallow treatments and helps to solve minor wrinkles on the skin, such as wrinkles around the eyes, between the eyebrows, crow’s feet, and forehead. It makes the skin surface smoother.
2.0 mm Depth Head (Cherry Pink Head): Ideal for reducing wrinkles all over the face, lifting eyebrows, correcting droopy eyelids, and addressing nasolabial folds. The new narrow-shaped head is small, slender, and thin, using MF2 Macro Focus Ultrasound technology with up to 8 times higher energy, causing less pain. It helps tighten pores and is suitable for delicate areas like the sagging skin around the eyes.
3.0 mm Depth Head: Suitable for addressing middle-layer skin issues composed of fat and cellulite. This head helps reduce fat, tighten the face, decrease sagging, and stimulate new collagen production under the skin.
4.5 mm Depth Head: Ideal for deep skin issues at the SMAS layer, comparable to surgical facelifts.

Timeframe for Seeing Results from the Ultraformer III Program

You will see approximately 20% of the results immediately after the procedure. However, this can vary depending on the individual and their specific issues. Clear and noticeable results will appear after 2 months, which also depends on each person’s aftercare and personal habits.

How long does the Ultraformer III program last?

The results can last on the face for about 5-6 months. When you feel that the skin is becoming less firm or starting to sag, you can undergo additional treatments. It can be done continuously every 4-6 months to strengthen the skin and continuously build collagen under the skin.

Which areas can the Ultraformer III program be used on?

Face
Neck
Chest
Upper arms
Thighs
Abdomen
Hips

Who is the Ultraformer III program suitable for?

Those with sagging skin on the face
Those with sagging skin on the neck
Those with sagging skin on the chest
Those with drooping eyebrows and eyelids
Those with sagging lower eyelids
Those with sagging cheeks
Those with nasolabial folds
Those with crow’s feet
Those with under-eye bags
Those with sagging hips
Those with sagging upper arms
Those with sagging, non-firm thighs
Those with sagging breasts
Those with fine wrinkles around the eyes
Those who desire healthy, youthful-looking skin

Steps of the Ultraformer III Program

Consult with the doctor and provide information about any chronic diseases, surgical history, or previous procedures on the face. This allows the doctor to assess whether the patient is suitable for the procedure and to evaluate facial issues, plan facial adjustments, and determine the appropriate number of shots.
The doctor will recommend applying a numbing cream for about 30-45 minutes before starting the procedure.
The doctor will begin the procedure, starting with the applicator head with the lowest energy level and gradually increasing to the highest until the planned number of shots is completed.

Preparation before undergoing the Ultraformer III Program

Get sufficient rest, about 6-8 hours.
Avoid using acidic facial skincare products such as retinoids or AHAs.
Avoid wearing makeup and clean your face thoroughly.
Eat foods that help boost collagen in the body.
If you have skin inflammation or abrasions, consult with a doctor before proceeding.
If the treatment area has surgical wounds, wait at least 6 months before undergoing the procedure.

Post-Care after Undergoing the Ultraformer III Program

Avoid washing your face with warm water for 1 day or 24 hours.
Avoid prolonged exposure to extreme heat or cold.
Apply sunscreen with SPF greater than 30++ every day to protect the sensitive skin from sunlight.
Follow any additional care instructions provided by your doctor.

Ultraformer MPT

What is an Ultraformer MPT?

Ultraformer MPT is a skin-tightening device in the same category as Hifu. It helps to lift and firm the skin, reduce wrinkles, dissolve fat, and stimulate collagen production. It is a genuine device that meets safety standards certified by the FDA in Europe, Australia, the United States, South Korea, and Thailand. It is imported by the sole authorized distributor in Thailand. The Ultraformer MPT uses Focused Ultrasound technology with Hyperthermia Lifting Therapy, delivering energy into the deep layers of the skin with two types of energy:

Micro Focused Ultrasound
- Depth levels: 1.5 mm, 3 mm, 4.5 mm
- Temperature: approximately 65-75°C
- Energy diameter: 0.5 mm

Macro Focused Ultrasound
- Depth levels: 6 mm, 9 mm, 13 mm
- Temperature: approximately 65-75°C
- Energy diameter: 1 mm

The unique feature of Ultraformer MPT compared to other Ultraformer models is its variety of applicator heads designed to suit different skin types and problems. Ultraformer MPT has 3 types of applicator heads:

Circular Energy Release (Circle): Releases circular energy to rejuvenate and stimulate collagen, making the skin brighter, such as the ULTRABOOST head.

Linear Energy Release (Linear): Releases linear energy to lift and tighten the skin while dissolving fat.

Dot Line Energy Release (Dot Line): Releases energy in a series of dots, providing consistent and precise energy that can penetrate deep into the SMAS (Superficial Musculo Aponeurotic System) layer. This tissue layer connects the muscle and fat layers on the face, supporting the skin and helping to keep the face firm.

Results of Ultraformer MPT

After undergoing Ultraformer MPT, you will see an immediate change of about 20%, with the facial skin appearing more lifted and firm. Subsequently, the treated area will be continuously stimulated to produce new collagen, with results gradually becoming clearer within 1-3 months, depending on each individual’s skin condition. The results can last for 6-8 months.

Which areas can Ultraformer MPT be used on?

Face
Neck
Upper arms
Thighs
Abdomen
Waist
Back wings (upper back)
Excess skin under the armpits

Who is Ultraformer MPT suitable for?

Those who want to reduce wrinkles on the entire face, crow’s feet, and around the eyes, and lift and tighten the skin without surgery
Those who want to contour their face and sharpen their jawline
Those who want to reduce sagging skin on the face and neck
Those who want to correct downturned mouth corners and nasolabial folds
Those who want to lift drooping eyebrows
Those who want to tighten their cheeks and correct sagging cheeks
Those who want to tighten pores and achieve smooth, refined skin
Those who want to dissolve excess fat

Preparation before Undergoing Ultraformer MPT

Get sufficient rest, about 6-8 hours.
Avoid using acidic facial skincare products such as retinoids or AHAs.
Avoid wearing makeup and clean your face thoroughly.
Eat foods that help boost collagen in the body.
If you have skin inflammation or abrasions, consult with a doctor before proceeding.
If the treatment area has surgical wounds, wait at least 6 months before undergoing the procedure.

Steps of the Ultraformer MPT Procedure

To begin the Ultraformer MPT procedure, the doctor will select the appropriate applicator head to address the specific issues and customize the shooting pattern for each patient’s precise needs.
During the procedure, a cooling gel will be used to reduce pain and heat.
The procedure takes about 20-45 minutes (depending on the treatment area).
After completion, the face will be cleaned once again.

Post-Care after Undergoing Ultraformer MPT

You can apply moisturizer as usual.
Avoid pressing, massaging the treated area, or washing your face vigorously.
Avoid treatments and scrubbing the skin for at least 2 weeks.
Avoid laser facial treatments for at least 2 weeks.
Regularly apply sunscreen with SPF 30 PA+++ every time before leaving the house.
Avoid washing your face with warm water, as it can make the skin dry and tight, resulting in less effective outcomes.
Follow any additional care instructions provided by your doctor.